How can I reattach a loose LED strip?

You can easily reattach an LED strip that repeatedly comes loose from the furniture.

Please follow the instructions below and observe the safety information provided.

You will need:
a hot glue gun
suitable hot glue sticks
a clean, dry cloth

Instructions:

Switch off the lighting and safely disconnect the furniture from the power supply.

Carefully clean the area where the LED strip is to be attached using a clean, dry cloth. The surface must be free of dust, grease and moisture.

Apply small dots of hot glue to the affected area. Please use only a small amount of glue and make sure not to apply it directly to the LEDs or electrical contacts.

Carefully press the LED strip into the still-warm hot glue and hold it in place for a few seconds until the glue has cooled and hardened.

Check that the LED strip is securely and fully attached. Once the hot glue has cooled completely, you can carefully remove any excess glue.

Important information:
Do not apply glue directly to the LEDs, solder joints or electrical contacts.
Apply the hot glue only in small dots and not over a large area.
Take care not to bend or damage the LED strip when pressing it into place.
Keep the furniture disconnected from the power supply while carrying out the work.
Allow the hot glue to cool completely before switching the lighting back on.